Product Introduction; Product Overview - Intellinet 561082 Manual De Instrucciones

PoE-Powered 5-Port Gigabit Switch with PoE Passthrough • Instructions

Product Introduction

Product Overview

The Intellinet PoE-Powered 5-Port Gigabit Switch with PoE Passthrough is designed to take
power from a PoE switch and pass both data and electrical power to a number of PoE-
compatible devices via standard Cat5e or Cat6 network cables. Equipped with five Gigabit
Ethernet ports, this switch can power up to four wireless LAN access points and bridges,
VoIP phones and/or IP video cameras; draw its own power from the PoE switch it's connected
to; and deliver network speeds of up to 1,000 Mbps.
When you connect the PD port (Port 1) to a PoE-enabled, IEEE 802.3af/at-compliant PoE
switch, the Intellinet PoE-Powered 5-Port Gigabit Switch uses some of the electric current to
power itself and passes the available surplus power to up to four PoE edge devices, such as
VoIP phones, allowing you to realize the full potential of each of the PSE ports in your data
center.
Each of the four PSE ports (Ports 2-5) can provide up to 30 watts. The product is compliant
with IEEE 802.3af and IEEE 802.3at standards and can be powered either by the included
adapter or via PoE.
Product Features
• Receives power from a PoE injector or PoE
switch and provides power to up to four PoE
network devices
• IEEE 802.3at/af-compliant RJ45 PoE output
ports
• Green Ethernet power-saving technology
deactivates unused ports and adjusts power
levels based on the cable length
General Specifications
• Backplane speed: 10 Gbps
• Certifications: FCC Class B, CE, RoHS
• Metal housing
• Dimensions: 78 (L) x 140 (W) x 28 (H) mm /
3.07 (L) x 5.51 (W) x 1.1 (H) in.
Power Specifications
• Included AC power adapter:
- Input: 100 – 240 VAC, 50 – 60 Hz, 2.5 A
- Output: 48 VDC, 1.5 A
- PoE budget: 68 watts (maximum)
- Power consumption: 75 watts (maximum)
Package Contents
• PoE-Powered 5-Port Gigabit Switch
with PoE Passthrough (A)
• Power adapter (B)
• Power cable (C)
• Instructions
4
ENGLISH
• Can be powered via PoE or the included
power adapter
• Total power budget of 68 watts when using
AC power and 26 watts when powered via
PD input port
• Supports up to 2048 MAC address entries
• 256 kBytes buffer memory
• Weight: 0.6 kg (1.3 lbs.)
• Operating temperature: 0–40°C (32–104°F)
• Storage temperature: 0–70°C (32–158°F)
• Operating humidity: 10–90% RH,
non-condensing
• Via PD port (Port 1)
- Input: IEEE802.3af/at compliant
- PoE budget: 26 watts (maximum)
- Power consumption: 30 watts (maximum)
C
A
B
English