Velleman PCTV2 Guía Rápida página 4

• All modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
• Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
• Do not disconnect the device during formatting or upgrading.
Disconnecting the device may cause system errors.
• Clean the device with a dry, lint-free cloth. Do not use alcohol or
solvents.
4. Overview
Refer to the illustrations on page 2 of this manual.
1 HDMI port
2
reset button
3
micro SD port
5. Connecting the device
The device has the following ports and buttons:
HDMI port
Micro SD port
USB OTG port
Micro USB power
port
USB host port
6. Start using the device
To start using the device:
1.
Connect the device on the HDMI port of your TV, monitor or
beamer.
V. 02 – 12/09/2013
PCTV2
4
5
6
Plug the HDMI port of the device directly
to the HDMI port of your TV, monitor or
beamer, no cable needed.
Expand the memory of the device with a
micro SD card (max. 32 GB)
Use the included adapter to connect the
device to your pc (for example for data
transfer) or any USB device (mouse,
keyboard...).
Connect the device with the included to
USB power cable to your TV for charging.
Connect any USB device to this port
(mouse, keyboard...).
4
USB OTG port
micro USB power port
USB port
©Velleman nv