Clock Feature - Boundless VGB10 Información De Instalación Y Funcionamiento

2-2 Desktop Features

Clock feature

You can enable the Clock feature without entering Set-Up by
pressing Caps Lock +Alt+F11 if you are not in an ASCII emulation
mode.
The current time is displayed in the status line if this feature is
enabled. The format is HH:MM, followed by AM or PM if the 12-
hour format is selected. Use the following keys within the clock
features:
Key
â â or Tab
á á or Shift+Tab
ß or à
ß à
Return or Enter
A or P
If the clock feature is enabled, then the alarm sounds for five
seconds or until a key is pressed. Each alarm message can be up
to 20 characte rs and will be displayed in the status line until a
key is pressed. If the hourly chime is enabled, then the terminal
will beep once every hour. In Set-Up, select the Save settings menu
item to save the time format. The clock feature is disabled when
the terminal is turned off.
Function
Go to next field.
Go to previous field.
Move within a field.
If desired, check the 24-hour
format box. For example, before
entering 13:00, enable 24-hour
format.
For 12-hour format, set the time to
morning by pressing A or P for
afternoon.