Measurement Mode Selection; Measuring Mode; Measurement Procedure - Life Fitness BP3AX1-4U Manual De Instrucciones

5.4. Measurement Mode Selection

Choose which measurement mode you want to use before taking a blood pressure
reading. Press OK (M) to enter the menus, press L or M to select Measuring
mode, and press OK (M) to enter the submenu Select , «1» or «3/MAM» for Life
Fitness AveragingMode Technology™ with the scroll buttons and confirm your
selection by «OK».

MEASURING MODE

Life Fitness AveragingMode Technology™
1 3/MAM
In average mode, the unit takes 3 continuous
measurements, and afterwards calculates the
result based on an average using Life Fitness
AveragingMode Technology™ (see Section 2.4).
There is a 15-second rest time between
measurements; the unit beeps during the last 5
seconds to remind you of the upcoming
measurement.
Single Mode
In single mode «1», only one measurement is taken.

5.5. Measurement Procedure

After the cuff and arm have been appropriately
positioned and the measurement mode is set, the
measurement can be taken as follows. Press the
ON/OFF/START button. The Life Fitness Welcome
Hold left wrist at heart level
and remain still during
screen appears, and is followed by a screen which
measurement.
shows you how to properly hold your arms. If the
display off function is enabled, the Sleep Mode
screen appears for two seconds
before measurements are taken.
The pump begins to inflate the
cuff and the increasing cuff
pressure is displayed.
10