Rena Ware AQUA NANO HD CTU-300 Uso Y Mantenimiento página 15

CLEANING OR REPLACING THE PRE-FILTER MEDIA INSERT
We suggest wearing protective gloves when handling the cartridges
Clean the Media Insert regularly between replacements to extend the life of the
cartridge.
To clean:
1. Open the housing by turning the top counterclockwise and remove the media by
grabbing the base of the housing with both hands and push the end cap of the
media forward
2. Wash the reusable housing and rinse off the media insert with water and dry.
When washing the media mild rubbing is acceptable. Do not scrub the exterior of
the media too hard as it can be damaged permanently. DO NOT USE SOAP.
3. After cleaning, insert the Media with the punt up.
punt
outlet
nipple
punt
15