Accessories; Installation; Velcro Fastener Mounting; Mounting The Microphone - Alpine KCE-350BT Manual De Operación

Accessories

Check accessory parts.
KCE-350BT Module
Microphone
Velcro Fastener
10
-EN
Power Cable
x 1
10Pin DIN Cable
x 1
Microphone Mounting
Brackets
x 1

Installation

Velcro fastener Mounting

For the sake of safety, mount the adapter in one of the
following locations.
• Do not mount the adapter under your feet. Do not step on
the adapter, or press excessively on it.
• Before mounting the adapter, secure enough space at its
x 1
upper side to prevent noise or to result in malfunction
when sending or receiving data.
• Depending on the adapter mounting location noise may
occur when using a Bluetooth compatible device, or a
malfunction may result when sending or receiving data. In
this case, mount the adapter in another location.
Attach one side of the Velcro fastener to the box.
x 1
Remove the backing from the other side of the Velcro
strip. Gently press the adapter onto its selected
mounting location.
x 1
Velcro fastener

Mounting the Microphone

For the sake of safety, mount the microphone in the following
location.
• In a stable and secure location.
• In a location that does not inhibit safely driving the
vehicle.
• Mount the microphone in a location where the driver's
voice can easily be picked up.
Choose a location for the microphone that can easily pick up
the drivers voice. Requiring the driver to move towards the
mic for audibility causes a distraction that could be
dangerous.
Mount the microphone using the supplied Velcro
fastener or the bracket.
Floor