Introduction
Congratulations on purchasing the Gemini PM-100 speaker system. This
state of the art active 2-way speaker system includes the latest features
backed by a 3 year warranty. Prior to use, we suggest that you carefully read
all of the instructions.
Features
•
ABS plastic construction
•
Separate bass, treble and volume controls
•
Surround enhancement (3D Function)
•
All necessary cables
Cautions
1. Read all operating instructions before using this equipment. Keep this
manual in a safe place for future reference.
2. The apparatus should not be exposed to dripping or splashing and no
objects filled with liquids such as vases should be placed on the
apparatus.
3. To reduce the risk of electrical shock, do not open the unit. There are NO
USER REPLACEABLE PARTS INSIDE. Please contact the Gemini
Service Department or your authorized dealer to speak to a qualified
service technician.
4. Be sure that all AC power is OFF while making connections.
5. Do not expose this unit to direct sunlight or to a heat source such as a
radiator or stove.
6. This unit should be cleaned only with a damp cloth. Avoid solvents or
other cleaning detergents.
7. When moving this equipment, it should be placed in its original carton and
packaging. This will reduce the risk of damage during transit.
8. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. Operators of
electronic equipment should in no way be in contact with water.
9. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY
CONTROLS OR SWITCHES.
10. If any objects or liquid fall into the unit, turn off the power and unplug the
unit immediately and have the system checked by a qualified service
technician before using it again.
PM-100
Speaker System
Connections
1. Make sure that the power switch located on the front of the right speaker
is in the OFF position. This unit comes supplied with a DC power adaptor.
Plug the adaptor into the power jack (located on the bottom rear of the
right speaker). Then plug the adaptor into a proper power source.
2. Plug the cord coming from the left speaker into the connector marked L-
SPK on the right speaker.
3. Plug one end of the RCA cables into the output jacks on your mixer. Plug
the other end of the RCA cables into the jacks on the back of the right
speaker marked INPUT. When you are connecting the RCA cables, make
sure to match the color on the cable to the color on the speaker connector
(white = left channel, red = right channel).
4. Use the jack on the back of the right speaker marked OUTPUT to connect
to a subwoofer (optional).
Operation
1. Turn all of the controls (bass, treble and volume) located on the front of
the right speaker all the way to the left (the lowest level).
2. Press the power switch located on the front of the right speaker to the ON
position (the LED will light).
3. Adjust the bass, treble and volume controls to the desired levels.
4. For an enhanced effect, press the 3D button (located on the front of the
right speaker) to the ON position to add a 3 dimensional spacial effect to
your program.
Specifications
Output Power........................................................................25W + 25W WMRS
PMPO.........................................................................................................300W
Speaker Unit.....................................1.5" treble, 4" bass (magnetically shielded)
Impedance................................................................................................4 Ohm
Frequency Response..................................................................60 Hz - 18 kHz
Input Connectors...............................................................................RCA jacks
Output Connector....................................................3.5 mm stereo phone jack
Treble Up.....................................................................................10 dB ± 2 dB
Bass Up.......................................................................................10 dB ± 2 dB
Separation.................................................................................................48 dB
S/N Ratio..................................................................................................75 dB
Dimensions............................................7" x 5" x 10" (180 x 124 x 251 mm)
Weight.......................................................................................5.5 lbs (2.5 kg)
Page 2