// MOUNTING THE REAR WHEEL
1
Activate the Cage Lock function. Pull the cage of the rear
derailleur forward and press the Cage Lock button with the
symbol .
The rear derailleur cage remains tilted forward when
the Cage Lock function is activated.
installation of the rear wheel.
4
Screw the thru axle into the dropout using a 6 mm hex key
and tighten the thru axle to a torque of 12 Nm.
2
1.
Remove the thru axle from the frame.
2.
between the brake pads.
3.
Store the transport securing device for future transport
of your bike.
5
2
Deactivate the Cage Lock function. Pull the cage of the
derailleur slightly forward and carefully return the derailleur
to its original position.
3
1.
Insert the rear wheel into the dropout of the frame.
The brake rotor must be placed between the brake
pads.
Put the chain on the smallest sprocket of the
cassette.
1
2.
Slide the thru axle from the brake side (left in the
direction of travel) into the frame dropout and hub of
the wheel.