Setup Procedure - Aube Technologies TH401 Guía Del Usario

Setup procedure

The setup menu is shown on the following page.

Press the Up and Down buttons simultaneously for three seconds to enter
the setup menu.

Press the Up or Down button to change the option.

Press the Up and Down buttons simultaneously for one second to advance
to the next parameter.

When the last parameter is displayed, press the Up and Down buttons for
three seconds to save any changes and exit the menu.
NOTE: If you do not press any button for one minute, the thermostat will automati-
cally save any changes you have made and will then return to its normal display.
6
TH401