Contact Measuring - Suunto TANDEM Guia Del Usuario

TWO CONTACT
EDGES
Code:
PM-5/360PC
0
N
TANDEM
Fig. 3. Edges for contact
measurement
6

CONTACT MEASURING

The Tandem can be used for aligning satellite
dish antennas or for other type of contact mea-
suring. The clinometer incorporates two different
contact edges (see Fig. 3) which enable the mea-
surement to be made compared to the horizontal
or vertical plane. The scale (0 – 90 – 0 degrees)
can be used in contact measuring and it gives the
angle of the surface compared to the contact
plane.