Assign An Ip Address - Axis P7214 Guia De Instalacion

AXIS P7214/P7210 Installation Guide

Assign an IP address

Most networks today have a DHCP server that automatically assigns IP addresses to connected
devices. If your network does not have a DHCP server the AXIS P7214 will use 192.168.0.90 as the
default IP address.
AXIS P7210 will use 4 different IP addresses for each group of 4 video input connectors. Numbers
on the video encoder indicate each set of 4. 192.168.0.90 is the default IP address for group 1,
192.168.0.91 for group 2, 192.168.0.92 for group 3, and 192.168.0.93 for group 4.
AXIS IP Utility and AXIS Camera Management are recommended methods for setting an IP
address in Windows. These free applications are available on the Axis Network Video Product CD
supplied with this product, or they can be downloaded from www.axis.com/techsup. Depending on
the number of cameras you wish to install, use the method that suits you best.
Method
AXIS IP Utility
See page 10
AXIS Camera Management
See page 11
Notes:
• If assigning the IP address fails, check that there is no firewall blocking the operation.
• For other methods of assigning or discovering the IP address of the AXIS P7214/P7210, e.g. in other
operating systems, see page 14.
Recommended for
Single video encoder
Small installations
Multiple video encoders
Large installations
Installation on a different subnet
Page 9
Operating system
Windows
Windows 2000
Windows XP Pro
Windows 2003 Server
Windows Vista