IMPORTANT SAFETY INSTRUCTIONS
•
Install the product in accordance with local and national electrical codes. If you have any doubts or
questions about the electrical connections or if you need an electrical junction box installed, contact
a licensed electrician. In certain jurisdictions, this product needs to be installed by a licensed
electrician. Check with local authorities for applicable requirements.
•
The product must be mounted on a flat vertical surface capable of supporting the full weight of the
product.
•
Ensure the voltage marked on the product is the same as the electrical power supply to be used.
•
Do not connect to a dimmer switch or timer.
•
Always turn off electricity at the main circuit breaker or fuse box before installation. Failing to do so
could result in serious injury, electrical shock, and/or risk of fire.
•
Do not rely on wall switch alone to turn off the power.
•
Do not open or disassemble the product. There are no user-serviceable parts inside.
2
h
Englis
EN