OPERATION ______________________________
Close shaving
Please use the shaving attachment
1
If necessary, remove the attachment
by pressing in both side catches
and lifting off.
2
Insert shaving attachment
fully at the top and press down until
it clicks into place.
C
3
Press the
button to switch on the
appliance and start shaving.
C
4
Press the
button to switch off the
appliance after use.
Notes
Do not apply strong pressure when
7
shaving, as this could damage the
single blade foil.
You can remove the single blade
7
foil of the shaving attachment. To do
this, press both side catches on the
shaving attachment. Clean the blade
head with the cleaning brush sup-
plied.
Removing hair from nose
1
Attach the trimming attachment with
8
.
rotating blade
2
To turn the appliance on, press the
On/Off button
3
Insert the cutting unit gently into the
nostril.
Caution
Do not insert the appliance too far
7
into the nose during use.
4
Gently move the cutting edge in and
B
out of the nostril while rotating the
appliance.
8
care-
5
To turn the appliance off, press the
On/Off button
3
.
C
.
C
.
ENGLISH
27