Guardian Fall Protection 01700 Manual De Instrucciones página 10

Compatibility: When making connections with Velocity Harness, eliminate all possibility of
roll-out. Roll-out occurs when interference between a hook and the attachment point causes the
hook gate to unintentionally open and release. All connections must be selected and deemed
compatible with Velocity Harness by a Competent Person. All connector gates must be
self-closing and self-locking, and withstand minimum loads of 3,600 lbs. See the following for
examples of compatible/incompatible connections:
Connector
closed and
locked to
OK.
D-ring.
Two or more
snap hooks or
carabiners
connected to
each other. NO.
Two connectors
to same
NO.
D-ring.
Incompatible
or irregular
application,
which may
increase risk
of roll-out. NO.
8
Connector
to integral
lanyard.
NO.
Connector
directly to
webbing.
NO.
Application
that places
load on gate.
NO.
Connector
directly to
horizontal
NO.
lifeline.