Putting A Call On Hold When Connected To The Trunk Line; Putting A Call On Hold When Connected To A Pabx; Accessing The Provider's Services - Esse-ti FlyOne Instalación Y Uso

16 digits, only the first 16 digits will be stored into the
selected memory location.
Dialing a Number from Memory
1. Pick up the handset.
2. Press the RECALL key.
3. Press the memory location (0 ~ 9) on the keypad for the number you have
stored. The stored number will be dialed automatically.
Changing Stored Phone Numbers
1. Follow the steps described in "Storing Telephone Numbers into Memory."
2. The new phone number will automatically replace the previous one.
Putting a call on hold when connected to the
trunk line
When FlyOne is connected directly to the trunk line (not to a PABX) you have
to press the HOLD key in order to put a call on hold.
Ø Press HOLD button, the handset microphone will turn off and the
outside line will still be retained just listening to music, so the other
party cannot hear your side of conversation. You may replace the
handset.
Ø If the handset is not replaced press HOLD button, otherwise pick up it,
go back to normal conversation.

Putting a call on hold when connected to a PABX

When FlyOne is connected to a PABX, you have to press the FLASH key in
order to put a call on hold.
Ø Press the FLASH key during conversation. The call has now been put on
hold and you can access all the PABX services.

Accessing the provider's services

When FlyOne is directly connected to the trunk line (not to a PABX), FLASH
key allows you to access the telephone network provider's services (Call
Waiting, Conference...). Please ask the provider for a list of the available
services.
38 DESCRIPTION