Connecting A Usb Device - CONTINENTAL EDISON CEHCDVD511 Manual De Utilización

2.1/5.1
Press this button can switch 2.1 to 5.1 under dvd DOOR opened mode.

6.CONNECTING A USB DEVICE

1) Power-on the unit.
2) Make sure no disc has been inserted inside the tray.
3) Insert a USB key inside the connector.
4) Press the USB key from the remote control to start.
Remark: Depending on the capacity of the device, the reading can take more than 1 minute
before lauching the video.
The unit cannot read my USB device.
- Once you have plugged your device to the unit, you may need to switch on the USB device
before it can operate.
- This unit does not support a direct USB connection with a computer. You need to use a USB
device, a MP3 player or a PMP (Portable Multimedia Player with hard disk).
- If you are using a USB external hard disk: you need to connect your device simultaneously
to an external power source and to the unit. If you are using a self-powered PMP, make sure
that the battery is sufficiently loaded.
- Check that the files system of your USB device is formatted into the FAT or FAT 32 format.
USB device formatted into NTFS are not compatible with this unit. Caution: if you attempt to
modify your file system, formatting your device will erase all data. Please refer to your USB
device's instruction manual first.
- Warning: Connect your USB device directly to the USB port of the device. Using an extension
cable is not recommended and may cause interference and failure of data transfer.