CONTINENTAL EDISON CEHCDVD511 Manual De Utilización página 29

7
HDMI Mode Display Problem: When you select an HDMI display mode which is not supported
by your television (if you choose, for example, 1080i while your television supports up to 720p
only), you get a black screen. As a result, you cannot change the HDMI resolution in the setup
menu. You should then use a SCART cable to connect your television. Once the screen
displays normally again, you can change to an appropriate HDMI setting in the menu.
7
7.3.1 Bass management
Setup bass on or off.
Off: no bass uotput
On: bass output
7.3.2 Front speakers
Adjustement of the prespeaker sound.
7.3.3 Center speakers
Three central speaker adjustments of sound: Large,Small and None sound.
7.3.4 Surround speakers
Three surround speaker adjustements of sound: Large,Small and None suond
7.3.5 Subwoofer
Bass speaker adjustment of suond: None or Present.
7.3.6 Center spkr delay
Central speaker prolong setup.
7.3.7 Surr spkr delay
Sur round speaker prolong setup
7.3.8 Digital Output
Selecting the Digital Output setting allows the user to adjust the audio output on S/PDIF ports
to work in harmony with the audio equipment (e.g. receiver, speakers) connected to the player.
Off: Digital audio output is disabled.
PCM: Select this option when you are going to use stereo signals (2 channels). You should
combinethis option with "lower sampling rate", which is explained further on.
Raw: If you select this option the player will play the DVD's original audio track. Use this
option when you want to use the Dolby Digital AC3 signals through the optical or coaxial
audio output.
7.3.9 Night Mode
This listening mode is most suitable at night for softest audio output and least disturbance.
7 10
7
7
7
7
7
7