How To Use - HoMedics MIR-150 Manual De Instrucciones

Espejo cargador compacto led
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

U N I Q U E F E A T U R E S &
S P E C I F I C A T I O N S
P H O N E C H A R G I N G P O R T
Phone charging cable not included
1 X A N D 5 X M A G N I F I C A T I O N
Choose from Standard and Close-up views
8 L E D L I G H T S
Surrounds Mirror for even illumination
R E C H A R G E A B L E
Mirror charging cable Included
POWER ON/OFF
BUTTON
LED LIGHTS
1X MAGNIFICATION
PHONE CHARGING PORT
CHARGING
CABLE
4
H O W T O U S E
B E F O R E T U R N I N G T H E U N I T O N
• Make sure the unit is fully charged
C H A R G I N G T H E B A T T E R Y
5X MAGNIFICATION
Before turning the unit on, connect the unit to a power source or AC adapter by connecting the
charging cable to the charging port located on the side of the unit. A Blue LED indicator will blink
intermittently, indicating that charging is taking place. When charging is complete, the LED indica-
tor will stop blinking and remain steady. It takes approximately 5 hours for a full charge, which will
provide up to 10 hours of use, if only using the LED light. When the battery is getting low, the blue
LED indicator will blink and then turn off, indicating that the unit needs to be recharged.
U S I N G T H E M I R R O R
• Open the compact to expose the mirror and LED light.
• Press and hold the Power ON/OFF
• Press and hold the Power ON/OFF
the LED lights OFF.
• Close the mirror by pressing shut until it locks into position with a click.
MIRROR CHARGING PORT
U S I N G T H E P O W E R B A N K
• Connect the device to the power bank using your phone's charging cable to the USB Phone
Charging port located on the side of the mirror.
• When charging electronic devices, the blue LED charging indicator will illuminate and stay lit.
• When the power is getting low, the blue LED will blink and turn off, indicating that the unit needs
to be recharged.
NOTE: Always disconnect the charging cable after you finish using the power bank function.
button for 3-seconds to turn the LED lights on.
button again for 3-seconds, or quickly press twice to turn
PHONE CHARGING PORT
5

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido