Redial Function - ClearSounds CSC600D Manual De Instrucciones

█ Redial Function

The Redial key is used to quickly redial the last number you
dialed.
1. Lift the handset or press the Speaker key and listen for
the dial tone.
2. Press the Redial key. The phone will redial up to 32
digits automatically.
Dialing from the Redial List
1. Press the Redial key in standby mode.
2. Press ▲ or ▼ repeatedly until you find the number you
want to dial. If you have the Talking Review Mode set
to ON, the number for each record will be announced as
you scroll through the Redial list.
3. Pick up the handset or press the Speaker key to dial.
Clearing the Redial List
1. Press the Redial key in standby mode.
2. Press and hold the
"Empty list" to indicate that all the entries in the list
have been deleted.
Storing from the Redial List
You can add a number to the phonebook from your redial list:
1. Press the Redial key in standby mode.
2. Scroll to the desired number by pressing ▲ or ▼.
3. When the number appears on the display, press the
Store soft key. You will be prompted to enter a name
using your keypad (see page 36 for instructions on
how to enter using the character map).
4. Press the Save soft key and you will see "Number
Stored".
Note: If no numbers are found in the Redial list, the display
will show "Empty". When the Redial list is full, each
time you dial a new number, the oldest number stored is
automatically erased.
key, and the display will show
26 – ENGLISH