ClearSounds CSC600D Manual De Instrucciones página 39

█
VIP Setting
This feature allows you to assign one specific melody to
everyone in your phonebook. You may choose from eleven
different ring tones. NOTE: This feature ONLY works when you have
subscribed to Caller ID service, the telephone information has been stored in
the phonebook and the ringer is ON.
1. Press the Menu soft key to display the main menu list.
2. Press ▼ to scroll to Set Phone and then press the Select
soft key
3. Press the Select soft key to access Set Ring. The display
shows Day Volume.
4. Press ▼ to move to VIP tone:
5. Press the Change soft key to select the desired Ring Tone
(Standard, Wilhelm Tel, Small world, Prelude, Love is blue,
Ashita, NO4, NO5, NO1, NO2, Fuga). Each time you press
the Change soft key, the phone rings with the selected ring
tone.
6. Press the Save soft key to confirm.
TROUBLESHOOTING
No dial tone
1. Check that all phone cord connections and AC adapter are
securely plugged into the phone, wall jack and electric
outlet.
2. Check that the phone is in the correct dialing mode: tone or
pulse (page 22).
3. Plug another phone into the wall jack to make sure your
phone service is working.
No audible ringer
1. Make sure the ringer is not turned off (pages 16 & 17).
2. Check the volume level of the ringer (pages 16 & 17).
3. Verify the AC adapter is securely plugged into the AC outlet
and phone.
4. You may have too many extensions on your line. Try
unplugging a few a devices.
39 – ENGLISH