Programming - claber Aquauno LOGICA Manual Del Usuario

Programming

US
Simply turn the single-control knob to one of the 15 preset watering programs
and the timer will start the cycle within 10 seconds; therefore it is necessary to
set the timer at the exact time you want it to start watering. When a program
is chosen, there will be two clicks: the first click is for battery level check
and the second click opens the valve to begin watering.
Example:
In position 4, the timer releases
water for 5 minutes twice a day.
Notes:
tion, timer is (stand-by) inactive.
manual function mode; if you need to use your hose or faucet without
disconnecting the unit, by simply turn the single-control knob to any
program and allow 10 seconds of delay. Make note that this will reset
your setting, so you will have to program the timer again at the desired
time for the watering cycle to start.
8
o the O posi-
List of the 15
preset programs: