Nautilus W10120N Guía De Uso Y Cuidado página 13

TROUBLESHOOTING GUIDE
Problem
Start button does
not light up.
Start button lights
up, but fan does
not start.
The distiller
leaking.
Possible Cause
Distiller is not plugged in.
Boiling chamber is not fully
inserted.
The fan's delayed start
system has not yet
activted the fan.
The boiling chamber is not
properly installed.
The o-ring is damaged or
missing from the baffle.
The flat gasket between
the boiling chamber
spout and baffle is
missing or damaged.
-10-
Solution
Plug the distiller into a rated
voltage outlet.
Make sure the boiling
chamber is placed properly.
See #8 on page 6.
Wait at least ½ hour for the
fan to start.
Push the boiling chamber into is
the distiller chassis so that
both the boiling chamber and the
electrical connection
are tightly joined.
See page 6.
If damaged, replace o-ring.
Make sure the o-ring is
properly placed on the baffle,
fitting in the circular groove.
See page 6.
Replace gasket.