Grandstream GWN7600LR Manual Del Usuario página 5

4. Connect the Ethernet cable (RJ45) to the correct ports of your GWN-
7600LR.
5. Align the GWN7600LR with the Base Bracket and pull it down to the
right position.
6. Install the 2x Assembled screws to fix GWN7600LR on the Mounting
Bolt.
4
CONNECT TO GWN7600LR DEFAULT WIFI NETWORK
GWN7600LR can be used as standalone access point out of box, or
after factory reset with Wi-Fi enabled by default.
After powering the GWN7600LR and connecting it to the network,
GWN7600LR will broadcast a default SSID based on its MAC address
GWN[MAC's last 6 digits] and a random password.
Note: GWN7600LR's default SSID and password information are
printed on the MAC tag of the unit.
5
~5~
ACCESSING THE CONFIGURATION INTERFACE
A computer connected to the GWN7600LR's SSID, or to the same net-
work as the GWN7600LR can discover and access its configuration inter-
face using one of the below methods:
Method 1: Discover GWN7600LR using its MAC Address
1. Locate the MAC address on the MAC tag of the unit, which is on the
underside of the device, or on the package.
2. From a computer connected to same network as the GWN7600LR,
type in following address using GWN7600LR's MAC address on your
browser https://gwn_<mac>.local
Example: If a GWN7600LR has the MAC address 00:0B:82:8C:4D:F8,
this unit can be accessed by typing https://gwn_000b828c4df8.local on
the browser.
~6~