Start And Stop - Chicago Pneumatic TITAN EXPRESS Serie Manual Del Usuario

OPERATING
The following checks must be made before starting, each time you use the pump.

START AND STOP

Starting the motor
Torque Setting:
Stopping the pump
When taking a break
6. MAINTENANCE
WARNING :
• The electrical power cord must be disconnected from electrical outlets before performing maintenance or repair procedures. Never perform main-
tenance when the power pack is running.
• Before starting maintenance on the machine, clean it in order to avoid exposure to hazard substances.
• Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by warranty or product liability.
• When cleaning mechanical parts with solvent, comply with appropriate health and safety regulations and ensure there is satisfactory ventilation.
• For major service to the machine, contact your nearest authorized workshop.
• After each service, check that the machine's vibration level is normal. If not, contact your nearest authorized workshop.