Mirubee Mirubox Manual Del Usuario página 16

Installation
1
Before using the mirubox ensure that the condi-
tions are the appropriate for working, and that
the protection equipment is the adequate.
1. After turning off the main circuit
braker of the home, take out the pro-
tection cover of the electrical panel.
2. Stick the mirubox to the wall, near the
electrical panel, with the sticky tape
provided.
3. Unscrew the connectors of a circuit breaker, intro-
duce the pin terminals of the cable that powers the
mirubox and screw the connectors again.
4. For each current clamp, first connect the jack plug of
16