Briteq Beam Matrix 5x5-RGBW Manual De Instrucciones página 15

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
RDM FUNCTIONS / REMOTE SETUP
RDM means "Remote Device Management". This projector works with a brief set of RDM-functions which
means that it can setup a bi-directional communication with an RDM-compatible DMX-controller. Some of
these functions are briefly explained below, others will be added in the future.
 The DMX-controller sends out a "discovery command", all RDM devices respond and send their unique
device ID.
 The DMX-controller asks each RDM device for some basic data so it knows which devices are connected.
The POWERPIXEL projector will respond:
 Device name: BEAM MATRIX5x5
 Manufacturer: Briteq®
 Category: LED Dimmer
 Firmware: x.x.x.x
 DMX address: xxx
 DMX footprint: xx
 Personality: xx
 The DMX-controller can send certain commands to each RDM device which allow remote setup of the
units. Thanks to this the projector can be setup remotely.
The following functions can be managed remotely:
No more need to take a ladder and set all units one by one!
 DMX START ADDRESS: The start address can be set remotely from 001 to xxx.
 PERSONALITY: The DMX working mode (DMX-chart) can be set remotely.
These 2 functions make it possible to prepare a complete DMX-patch of all projectors on the DMX-
controller and send these data to all projectors at once. More functions will be added later.
DMX CHARTS
4CH RGB+DIM Mode: all pixels working together in RGB + MASTER DIM/SOUND/STROBE
This mode is 100% compatible with a lot of of our other projectors.
Channel:
Value:
1
000-255
2
000-255
3
000-255
000-190
191-200
4
201-247
248-255
4CH RGBW Mode: all pixels working together in RGBW
All pixels are controlled together using 4 channels.
Channel:
Value:
1
000-255
2
000-255
3
000-255
4
000-255
5CH RGBW+DIM Mode: all pixels working together in RGBW + MASTER DIM/SOUND/STROBE
This mode has the same functionality as the 4CH RGB+DIM mode but with control for white color added.
This mode is 100% compatible with BEAMBAR5-RGBW and BEAMBAR10-RGBW
Channel:
Value:
1
000-255
2
000-255
3
000-255
4
000-255
000-190
191-200
5
201-247
248-255
BRITEQ
®
(firmware version of the projector)
(current DMX start address of the projector)
(number of DMX-channels used by the projector)
(current personality [or DMX-working mode] used by the projectors)
Function:
Red (0-100%)
Green (0-100%)
Blue (0-100%)
Master dimmer
Sound (random patterns)
Strobe
Master dimmer @ 100%
Function:
Red (0-100%)
Green (0-100%)
Blue (0-100%)
White (0-100%)
Function:
Red (0-100%)
Green (0-100%)
Blue (0-100%)
White (0-100%)
Master dimmer
Sound (random patterns)
Strobe
Master dimmer @ 100%
13/109
OPERATION MANUAL
Remarks
000=0% ~ 190=100% (full open)
Audio sensitivity: 191=low ~ 200=high
Increasing speed: 201=slow ~ 247=fast
Master dimmer is full open
Remarks
Remarks
000=0% ~ 190=100% (full open)
Audio sensitivity: 191=low ~ 200=high
Increasing speed: 201=slow ~ 247=fast
Master dimmer is full open
BEAMMATRIX5x5-RGBW

Publicidad

Tabla de contenido
loading

Tabla de contenido