Vibration information
Vibration total values (triax vector sum) determined according to EN 60745
•
Typical
Vibration emission value a
•
weighted
Uncertainty K = 1.5m/s²
vibration
Warning: The vibration emission value during actual use of the
power tool can differ from the declared value depending on the ways
in which the tool is used dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and
in good condition.
The tightness of the grip on the handles and if any anti vibration
accessories are used.
And the tool is being used as intended by its design and these
instructions.
This tool may cause hand-arm vibration syndrome if its use is
not adequately managed.
Warning: To be accurate, an estimation of exposure level in
the actual conditions of use should also take account of all parts of
the operating cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total working period.
=2.12m/s
2
h
6
Helping to minimise your vibration exposure risk.
ALwAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well
lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration
accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration tool use across
a number of days.
Accessories
•
TCT blades (on machine Planing width: 82mm blade)
•
Socket spanner
•
Rebate depth gauge
•
Rebate parallet guide
Only use reversible twin cutting blades that cannot be reground.
we recommend that you buy all your accessories from the store
where you purchased the tool. Use good quality accessories marked
with a well-known brand name. Refer to the accessory packaging for
further details. Store personnel can also help and advise.
o
C or less.
2
1
1
1