End Of Programming; Technical Data - Crouzet CTR24L-2512 Instrucciones De Puesta En Servicio

5.0 RESET Mode (totaliser B)

5.1 End of programming

5. Technical data

Supply voltage
Power supply:
Display:
Data retention:
Polarity of the inputs:
4
manual reset via the red
RESET key and
electrical reset via the
RESET input
no reset (red RESET key
and RESET input locked)
only electrical reset via
the RESET input
only manual reset via the
red RESET key
The programming routine
is repeated once more.
The values set until now
can be checked and modi-
fied.
The programming routine
wil be left and all values
set will be stored as new
parameters.
Afterwards the device is
ready for operation.
10 ... 30 V DC/max. 55 mA
with inverse-polarity protection
6 digits, red 7 segment
LED display, height 8 mm
EEPROM
Programmable, npn or pnp
for all inputs
Input resistance:
Count frequency:
DC power supply:
Input level:
typ. low level:
typ. high level:
Fmax:*
tot.tot
* at maximum frequency square wave pulses 1:1
Minimum pulse length for the Reset input:
5 ms
Input level:
Standard level:
Pulse shape:
Ambient temperature:
-20 ... +65 °C at 10 ... 26 V DC
-20 ... +55 °C at >26 ... 30 V DC
Storage temperature:
Altitude:
EMC:
Emission
Immunity
Housing:
For front panel mounting: 48 x 24 mm
acc. to DIN 43700, RAL7021, dark grey
Weight:
Protection:
Cleaning:
The front of the units is to be cleaned only with
a soft wet (water!) cloth.
appr. 5 k
24 V 12 V
Standard
2,5 V 2,0 V
22,0 V 10 V
kHz kHz
25 15
Low: 0 ... 0,2 x U B [V DC]
High: 0,6 x U B ... 30 [V DC]
any,
Schmitt-Trigger inputs
–25 ... +70 °C
to 2000 m
EN 55 011 Class B
EN 61 000-6-2
appr. 50 g
IP 65 (front)