Steren COM-850 Guía Rápida De Instalación página 17

2. Installation
Before to make connections make sure that the internet
service is on.
1. Move the middle antennas and place it in vertical position. The
lateral antennas should form a 45° angle according with central
antennas.
2. Disconnect the modem from the power input.
3. In case that the modem is connected to a router, should be
disconnected.
4.Insert the Ethernet cable into WAN port of the router and connect it
into an available port in the modem.
5. Use an Ethernet cable to connect a PC to any of the LAN ports of
the router (marked from 1 to 4).
6. Connect the router and the modem into a power supply.
LAN WAN
PORT PORT
ETHERNET
CABLE
POWER SUPPLY
MODEM
LAN
ETHERNET
PORT
CABLE
COM-850 COM-850
INTERNET
POWER
SUPPLY
17
17 17