Save A Multi-Stage Cooking To A Number Key - CaterChef 688.010 Manual De Funcionamiento

SAVE A MULTI-STAGE COOKING TO A NUMBER KEy

For frequently used cooking program, you can save it to a number key and conveniently activate it by touching the
number key and then START pad.
Each of the number keys is pre-set with a cooking program. In waiting mode, touch any of the ten number pads,
you are selecting a cooking program, then press START pad to start the preset program.
The following are default settings for each of the number keys
Number/Memory Pads
Preset Cooking Time
The user is free to reset the cooking program stored under each of the ten number keys anytime.
In order to set a cooking program, which may contain up to 3 stages consecutive cooking periods with different
power levels, and to designate a number key to this program, see the example bellow:
To set medium power cooking for 8 min, and save it to number pad 5:
1. Open the door and place food in the oven, close it.
2. Touch PROG once.
3. Press number pad 5.
4. Press Power Level twice to select MED.
5. Touch number pads 8, 0, 0.
6. Press PROG to save.
NOTE:
When the program has been saved, you can press START to start cooking or you can also
press STOP/RESET pad to cancel.
You can set a two or three stages cooking program by repeating the steps 4 and 5 once or twice.
Suppose you want to set a multi-stage cooking program to number pad 3.
First stage: 5 minutes of DEF microwave power cooking;
Second stage: 3 minutes of HI microwave power cooking;
Third stage: 1 minutes of MED microwave power cooking.
Step:
1. Open the door and place food in the oven, close it.
2. Touch PROG once.
3. Press number pad 3.
4. Press Power Level three times and press number pad to enter the cooking time.
5. Press Power Level once and press number pad to enter the cooking time.
6. Press Power Level twice and press number pad to enter the cooking time.
7. Press PROG to save.
NOTE
:
If you want the oven to start immediately after you touching any of the number keys instead of after you touching the
Start pad, press and hold down Stop/Reset for 5 sec until "P L" appears on display; now you don't need to press Start
pad after selecting a cooking program by touching any of the number keys. If you want to cancel the auto-number
start setting, you can press and hold down Stop/Reset for 5 sec until "P PROG appears on display.
1 2 3 4
:10 :20 :30 :45
- 21 -
5 6 7 8
1:00 1:30 2:00 2:30 3:00
9 0
3:30