TrimmerPlus BC720 Manual Del Operador

Brushcutter Attachment Operator's Manual
SERVICE INFORMATION
TABLE OF CONTENTS
Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Rules for Safe Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Maintenance & Repair Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Cleaning and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
All information, illustrations, and specifications in this manual are based on the latest product information
available at the time of printing. We reserve the right to make changes at any time without notice.
Copyright© 2010 MTD SOUTHWEST INC, All Rights Reserved.
For service call 1-800-345-8746 in the United States or 1-800-668-1238 in Canada to obtain a list of authorized
service dealers near you. For more details about your unit, visit our website at www.mtdproducts.com or
www.mtdproducts.ca.
If you have difficulty assembling this product or have any questions regarding the controls, operation or
maintenance of this unit, please call the Customer Support Department.
DO NOT RETURN THE UNIT TO THE RETAILER. PROOF OF PURCHASE WILL BE REQUIRED FOR
WARRANTY SERVICE.
Service on this unit both within and after the warranty period should be performed only by an authorized and
approved service dealer.
Before beginning, locate the unit's model plate. It lists the model and serial numbers of the unit. Refer to
the sample plate below and copy the information for future reference.
Copy the model and parent part numbers here:
Copy the serial number here:
PART NO. 769-03435B P00
BC720
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols,
and their explanations, deserve your careful attention and understanding. The safety warnings do
not by themselves eliminate any danger. The instructions or warnings they give are not substitutes
for proper accident prevention measures.
SYMBOL MEANING
WARNING:
follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
CAUTION:
to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric
shock and personal injury.
SAFETY ALERT:
avoid serious personal injury. May be used in conjunction with other symbols or pictographs.
DANGER:
others. Always follow the safety precautions to reduce the risk of fire, electric shock and
personal injury.
NOTE: Advises of information or instructions vital to the operation or maintenance of the equipment.
READ THE OPERATOR'S MANUAL AND FOLLOW ALL WARNINGS AND SAFETY
INSTRUCTIONS. FAILURE TO DO SO CAN RESULT IN SERIOUS INJURY TO THE OPERATOR
AND/OR BYSTANDERS.
FOR QUESTIONS, CALL 1-800-345-8746 IN U.S. OR 1-800-668-1238 IN CANADA
WARNING:
to gas-powered trimmers or brushcutters. Using with an electric product could lead to
damage to the unit and/ or serious personal injury.
READ ALL INSTRUCTIONS BEFORE OPERATING
WARNING:
instructions before operating the unit in order to ensure the safety of the operator and any
bystanders. Please keep these instructions for later use.
• Read the instructions carefully. Be familiar with the controls and proper use of the unit.
• Do not operate this unit when tired, ill, or under the influence of alcohol, drugs, or medication.
• Children and teens under the age of 15 must not use the unit, except for teens guided by an adult.
• All guards and safety attachments must be installed properly before operating the unit.
• Inspect the unit before use. Replace damaged parts. Check for fuel leaks. Make sure all fasteners are in
place and secure. Replace parts that are cracked, chipped, or damaged in any way. Do not operate the
unit with loose or damaged parts.
• Be aware of the risk of injury to the head, hands and feet.
• Carefully inspect the area before starting the unit. Remove all debris and hard or sharp objects such as
glass, wire, etc.
• Clear the area of children, bystanders, and pets. At a minimum, keep all children, bystanders, and pets
outside a 50 feet (15 m.) radius; there still may be a risk to bystanders from thrown objects. Bystanders
should be encouraged to wear eye protection. If approached, stop the unit immediately.
• Only for use on add-on-capable, gas-powered trimmers that have the On/Off control located on the grip.
SAFETY WARNINGS FOR GAS POWERHEADS
• Store fuel only in containers specifically designed and approved for the storage of such materials.
• Always stop the engine and allow it to cool before filling the fuel tank. Never remove the fuel cap or add
fuel when the engine is hot. Always loosen the fuel tank cap slowly to relieve any pressure in the tank.
• Always prepare or handle fuel in a clean, well-ventilated outdoor area where there are no sparks or
flames. Do not smoke.
• Never operate the unit without the fuel cap securely in place.
• Avoid creating a source of ignition for spilled fuel. Wipe up any spilled fuel from the unit immediately
before starting the unit. Move the unit at least 30 ft. (9.1 m) from the fueling source and site before
starting the engine.
• Never start or run the unit inside a closed room or building. Breathing exhaust fumes can be fatal.
Operate this unit only in a well-ventilated outdoor area.
• Squeeze the throttle control and check that it returns automatically to the idle position. Make all
adjustments or repairs before using the unit.
• Do not touch the engine, gear housing or muffler. These parts get extremely hot from operation, even
after the unit is turned off.
• To reduce fire hazard, replace a faulty muffler and spark arrestor. Keep the engine and muffler free from
grass, leaves, excessive grease or carbon build up.
WHILE OPERATING
• Read and understand all safety warnings before operating this unit.
• Inspect the unit thoroughly for loose nuts, bolts or damage before continuing. Repair or replace affected
parts as necessary.
• Wear safety glasses or goggles that meet ANSI Z87.1 standards and are marked as such. Wear
ear/hearing protection when operating this unit. Wear a face or dust mask if the operation is dusty.
• Wear heavy long pants, boots, gloves and a long sleeve shirt. Do not wear loose clothing, jewelry, short
pants, sandals or go barefoot. Secure hair above shoulder level.
• Adjust the J-handle that will provide the best grip.
• Use the unit only in daylight or good artificial light.
• Avoid accidental starting. Be in the starting position whenever pulling the starter rope. The operator and unit
must be in a stable position while starting. Refer to Starting/Stopping Instructions of the power head manual.
• Use the right tool. Only use this tool for its intended purpose.
• Do not overreach. Always keep proper footing and balance.
• Always hold the unit with both hands when operating. Keep a firm grip on both handles or grips.
• Keep hands, face, and feet at a distance from all moving parts.
• Do not operate the engine faster than the speed needed to cut. Do not run the engine at high speed
when not cutting.
• Always stop the engine when work is delayed, or when walking from one cutting location to another.
• If striking or become entangled with a foreign object, stop the engine immediately and check for
damage. Do not operate before repairing damage. Do not operate the unit with loose or damaged parts.
• Stop the unit and disconnect the spark plug for maintenance or repair.
• Use only original equipment manufacturer replacement parts and accessories for this unit. These are
available from an authorized service dealer. Use of any unauthorized parts or accessories could lead to
serious injury to the user, or damage to the unit, and void the warranty.
• Keep unit clean of vegetation and other materials.
• Always use the shoulder harness when using the brush blade attachment.
• Keep the J-handle between the operator and blade at all times.
• NEVER raise or use the brushcutter blade above waist level.
• Blade thrust may occur when the spinning blade contacts an object that it does not immediately
cut. Blade thrust can be violent enough to propel the unit and/or operator in any direction, possibly
causing a loss of control. Blade thrust can occur without warning if the blade snags, stalls or binds.
This is more likely to occur in areas where it is difficult to see the material being cut.
• For operation with the brush blade, do not cut anything thicker than 1/2 inch or a violent kickback
RULES FOR SAFE OPERATION
Failure to obey a safety warning can result in injury to yourself and others. Always
Failure to obey a safety warning may result in property damage or personal injury
Indicates danger, warning or caution. Attention is required in order to
Failure to obey a safety warning will result in serious injury to yourself or to
Never use this add-on with an electric-powered unit. Only attach the BC720
• IMPORTANT SAFETY INSTRUCTIONS •
When using the unit, all safety rules must be followed. Please read these
®
(2/10)