Auto Scan; Spectrum Chart; Scope; Rf Channel List - Galaxy Innovations ComboF DVB-S Manual De Instrucciones

6.2 A S
UTO CAN
The meter will scan all the saved frequencies and show the
lock status one by one and will then return to the main
menu once scanning is finished. Press [MENU] to abort a
scan in progress and return to the main menu.
6. 3 S C
PECTRUM HART
This menu shows the spectrum chart of the setting
frequency range. Please see below screenshot.
Press [/] to switch between cur, S: and E:
30~60~90:


:
cur:

mark:

S:

E:

6.4 S
COPE
This screen show 6 channels level (dBuV) in one page, use
[/] to move focus on channel number and press [OK]
change channel number.
6.5 RF C L
HANNEL
This menu shows all the locked frequencies during Auto Scan.
6.6 S
ETTING
User can enable/disable the power supply for antenna. 5V and 12V output are supported. And also
user can set to scan DVB-T, DVB-T2 and both of them during Auto Scan.
User`s Manual
The range of the level value.
The curse of the current frequency. Press [/] to change the value.
The current selected frequency.
The power level of the current frequency in the spectrum chart.
The start frequency of the spectrum chart.
The end frequency of the spectrum chart.
IST
13/18