Performance Issues Related To Graphics; Error Related To Third Party Controls; Performance Issue When Navigating In Script Tree View; Troubleshooting Common System Issues Using An Aki Terminal With A Pxmm - Kollmorgen KAS Guía Rápida

18.1.7

Performance Issues Related to Graphics

When designing Kollmorgen Visualization Builder projects, the CPU load may suddenly
increase when performing actions such as moving objects on the screen or hovering over
buttons, depending on which graphics card is used.
This problem may be solved by turning off the hardware acceleration of the graphics card. In
Windows this is done under the advanced display settings on the Troubleshooting tab.
Note:
Should
you experience problems with the graphic rendering, make sure the latest graphical driver is
used. If the latest graphical driver is used and rendering issues still occur, upgrade to a better graphics
card.
For more information see KVB User Guide, System Requirements
18.1.8

Error Related to Third Party Controls

When opening a project including third party controls, the third-party controls must be included
in the Kollmorgen Visualization Builder third party control folder. Otherwise the project
may terminate, or unexpected error messages may be displayed.
When referencing third-party assemblies (.dll files), make sure not to place two files with the
same fully qualified assembly name in the same folder, otherwise errors may occur.
18.1.9

Performance Issue When Navigating in Script Tree View

If you are working with a large Kollmorgen Visualization Builder project, especially a project
with many tags and alarms, you may find that navigating the script tree view is slow.
The performance can be improved by saving the project.
For more information see KVB User Guide, Script
18.1.10 Performance Issue When Navigating in Script Tree View
If you are working with a large Kollmorgen Visualization Builder project, especially a project
with many tags and alarms, you may find that navigating the script tree view is slow.
The performance can be improved by saving the project.
18.2

Troubleshooting Common System Issues Using an AKI Terminal with a PxMM

This section describes troubleshooting common problems with KVB and the AKI terminal
with PxMM.
Kollmorgen Visualization Builder | TROUBLESHOOTING
Related Information
Related Information
Kollmorgen | April 2017