Installing The Battery; Instructions For Charging - Rehan Looky 4 Manual Del Usuario

5. Installing the battery

Remove the battery lid to place the battery inside the handle of
the Looky4. Replace the battery lid.
1.
Charge the battery completely before using the Looky4.
Please read the charging instructions carefully.

6. Instructions for charging

Connect the wide end of the USB cable to the adaptor and plug
the adaptor into the wall socket. Connect the narrow end of the
USB cable to the Looky4 to start the charging process.
Note: the dot on the small connector marks the topside.
LED burning constantly
LED off
LED blinking
Charge the batteries in a well ventilated environment. Remove
the Looky4 from its carrying case when charging. Don't place it
in direct sunlight or near a radiator whilst charging.
When the battery is empty, the Looky4 will switch itself off. You
will hear a high pitched tone that fades away.
2.
batteries are being charged
batteries are fully charged
error / batteries are defect
3.
7