Williams Sound PPA R37-8 Manual De Usuario página 6

Belt Clip Installation
For hands-free operation of the PPA R37-8 receiver, use
the provided belt clip to secure the unit on your belt,
pocket or pants.
To Install: Position the belt clip on the rear of the PPA R37-
8 receiver as shown in Figure 3A. Turn the belt clip 180° left
or right as shown in Figure 3B. The belt clip is now installed
ALKALINE/
NiMH SWITCH
and ready for use.
To Remove: Turn the belt clip 180° so the edge points
toward the top of the unit as shown in Figure 3A. Gently
pull the belt clip away from the unit to remove.
Figure 3: Belt Clip Installation
Figure 3A
– +
A A
+ –
A A
SQUELCH
ADJUST
Figure 3B