Technical Features - BSVILLAGE PISCINE BIOTEMP Manual De Instalación

Disconnect power supply before carrying out ANY operation inside the Biotemp regulator control
NON-OBSERVANCE OF THE INSTRUCTIONS CONTAINED IN THE PRESENT MANUAL COULD CAUSE
INJURY TO PEOPLE AND/OR DAMAGE TO THE DEVICE.
Contents of Packaging:
Note: These products are DANGEROUS (IA) and require special precautions during use, handling, and
storage.

The Biotemp System has been designed to regulate pools from 5 to 150 m
B NEVER mix chemical products
NEVER allow children or people who have not read this manual to use or tamper with the
B
Biotemp System or any of its peripheral components (including chemical products).
Dimensions (H –W – L)
Weight
Power (50-60 Hz)
Dosing Calibration
Pump flow rate
1 min 2.5 mL/h Max 25 ml/h
2 min 15.1 mL/h Max 151 ml/h
3
min 151.2 mL/h Max 1,512 ml/h
4 min 540 mL/h Max 5,400 ml/h
5 min 975 mL/h Max 9,750 ml/h
Accessories upon request
Power (Step-Up)
Consumption (Step-Up)
ASSEMBLY
Make sure that the injection pressure is below 1.5 bar.
0000137176
Biotemp
WARNINGS
!ATTENTION!
panel.
The Biotemp is a timed dosing system.

TECHNICAL FEATURES

234x162x108 mm
1 kg
100240 VAC
Manual
12 – 24 (VAC – VDC)
10 W max
rev. 1.0
A) "Biotemp" Control System
B) Polyethylene delivery tube (5 m) X2
C) Screw plugs (=6 mm)
D) Bottom filter (PVC)
E) FPM non-return valve (3/8" GAS)
F) Adaptor for non-return valve
G) Mounting bracket for PSS3 2" inches (=50
mm)
Maximum back - pressure
Pump dosing
Absorption
3
.
1.5 bar
Standby
8 W
1