BSVILLAGE PISCINE BIOTEMP Manual De Instalación página 6

Priming
Priming is activated and deactivated through a side three-position switch (OFF – ON – MOM).
With the switch in the ON position, the system is on and ready for operation.
When the switch is on the OFF position, the pump goes on standby.
The pump:
When the regulation device is stored, it is recommended to pump clean water to rinse the tube.
Then, position the roller holder at 45°, rotating it clockwise.
These two precautions will facilitate the subsequent reactivation of the unit.
Keep away from frost.
Flow: presence of inlet flow (slave-operated by the filtering pump).
Alarm Displayed
Level
Flow
Parameter Error
Clock Fail
To restore the initial parameters (Default), perform the following steps:

Turn off the instrument

Hold down the UP and DOWN keys to turn on the instrument.

The instrument will display

Press the UP or DOWN keys to avoid resetting the default parameters

Press Enter to confirm
Default Parameters:
Language: English
Dosing: 100%
Weekly Timer: Empty
Advance:
Time: Maintain the set time
Calibration: Enabled
Flow: disabled
Password 0000 (Disabled)
0000137176
Alarms
Description
Low level alarm - Restore product
Instrument waiting - Restore Flow
- Press Enter to restore
Parameter Errors
parameters
-Press Enter to restore
Clock error
operation
Init. Default
YES
Init. Default
NO
rev. 1.0
Solutions
5