Various Function - LG 29FU6TS Manual Del Usuario

Various function

Setting the Clock
Before setting the on/off timer, first you should set
the current time.
Setting the OFF TIMER
This is the function to automatically switch the TV
to standby mode at a preset time.
Note:If the same time is set for the on time and off
time, only the off time operates.
Setting the ON TIMER
This is the function to automatically turn the TV on
at a preset time and channel.
Notes:
•If you don't press any button within 2 hours after
turning on the TV set by ON TIMER function, the
set will be automatically switched back to standby
mode.
•TV must be in standby mode for the On timer to
work.
Setting the Sleep Time
You don't have to remember to switch the TV to
standby mode before you go to sleep. The sleep
timer automatically turns the TV off after the
preset time elapses.
Press the SLEEP button to select the desired
sleep time.
Each time you press this button, the sleep time is
displayed one by one as shown below. The timer
begins to count down from the number of minutes
selected.
¡ ¡ ¡ ¡
---¡ 10 20 30 60
Notes:
•After a few seconds, the desired sleep time will
disappear and be operated automatically.
•To view the remaining sleep time, press the
SLEEP button once and the remaining sleep time
will be displayed.
•To cancel the sleep time, select the
mode by using the SLEEP button.
Auto Off
If there is no input signal, the TV is switched to
standby mode automatically in 10 minutes.
Operating the degauss (some
models)
In this TV set the magnetic field of the earth may
influence on the color purity of picture by neighbor
magnetic substance or installation direction of the
TV set. The stripes may appear on the screen or
the color may not be equal in the corner. You can
enjoy the program in high color quality by
operating the Degauss.
Notes:
•Do not operate this function often because the
lifetime of CPT may be shorten.
•If you cannot adjust the screen condition by
degaussing, try it again after about 4 minutes.
Key Lock
The TV can be set so that the remote control is
needed to control it.This feature can be used to
prevent unauthorized viewing.
Notes :
•With the key lock on, the display
appears on the screen if any button on the front
panel is pressed while viewing the TV.
•This programmed to remember which option it
was last set to even if you switch the TV from
standby mode.
Game (some models)
You can enjoy the TV game with this set.
Adjusting the Fine
This function is to adjust the picture to stable
condition when it is poor, for example, a horizontal
stripe, twisted picture or no color in broad-casting.
Notes :
¡ ¡ ¡
90 120 180 240 •To release the memorized fine tuning, program
again the fine-tuned channel by AUTO PROGRAM
or MANUAL PROGRAM.
•If the finely tuned channel is memorized, the color
of the channel number changes to yellow.
Favorite channel memory
Favorite channel memory is a convenient feature
that lets you quickly scan up to five channels of
Sleep ---
your choice without having to wait for the TV to
scan through all the in-between channels.
Auto Demonstration
Auto demo allows you to review all the menus
available on the TV set.
6
Key lock