Tabla de contenido
Publicidad
Enlaces rápidos
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
REV 14j
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
2010 by Harbor Freight Tools
©
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
. All rights reserved.
®
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Publicidad
Tabla de contenido
Resumen de contenidos para Badland Winches 68144
- Página 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
- Página 2 Line Speed Amp Draw lb. (kg.) fpm (mpm) (@ 12V) 20.5 (6.2) 1000 (454) 16.1 (4.9) 2000 (907) 12.8 (3.9) 3000 (1361) 10.7 (3.3) 4000 (1814) (2.6) 5000 (2268) (1.9) Page 2 For technical questions, please call 1-888-866-5797. Item 68144...
- Página 3 Fingers may be caught and get against the intrusion of solid objects, pulled into fairlead or drum. dust, accidental contact, and water. Grade 8 pull hook using strap only. A fastener strength rating. Item 68144 For technical questions, please call 1-888-866-5797. Page 3...
-
Página 4: Important Safety Information
6. Do not route electrical cables near sharp edges winch at the bottom of the drum. or parts that will move or become hot. Page 4 For technical questions, please call 1-888-866-5797. Item 68144... -
Página 5: Operation Precautions
17. Keep children and bystanders away while operating. 12. Use as intended only. Distractions can cause you to lose control. Do not lift items vertically or use for aircraft purposes. Item 68144 For technical questions, please call 1-888-866-5797. Page 5... - Página 6 33. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. Page 6 For technical questions, please call 1-888-866-5797. Item 68144...
-
Página 7: Service Precautions
4. Have the winch serviced by a qualified repair person (California Health & Safety Code § 25249.5, et seq.) using only identical replacement parts. This will ensure that the safety of the winch is maintained. SAVE THESE INSTRUcTIONS. Item 68144 For technical questions, please call 1-888-866-5797. Page 7... -
Página 8: Installation And Setup
Vehicle components are not damaged by drilling or driving screws. 4. Drill pilot holes for the mounting screws. 5. Secure in place with mounting screws. Page 8 For technical questions, please call 1-888-866-5797. Item 68144... - Página 9 3. Recoil the wire rope back into the winch to be able to support a load without damage. under at least 500 lb. of tension. 2. Uncoil the wire rope, except for 5 full wraps. Item 68144 For technical questions, please call 1-888-866-5797. Page 9...
-
Página 10: Clutch Operation
Hook Strap over the hook, then pull on the Hook Strap to pull out the wire rope. WARNING! Leave at least five full turns of wire rope on the drum. Page 10 For technical questions, please call 1-888-866-5797. Item 68144... - Página 11 Controller to retract the wire rope, and winch Stand well to the side while winching. the item as desired. Do not power the hook all the way into the fairlead to prevent damage. Item 68144 For technical questions, please call 1-888-866-5797. Page 11...
- Página 12 14 minutes, 15 seconds after every 45 seconds of continuous operation. Failure to carefully observe duty cycle limitations can easily over-stress a Winch contributing to premature Winch failure. Page 12 For technical questions, please call 1-888-866-5797. Item 68144...
- Página 13 3. Remove old Wire Rope and attach new assembly. Refer to instructions for tensioning the wire rope under Preparing the Wire Rope on page 9. 5. Test Electric Winch for proper operation. Item 68144 For technical questions, please call 1-888-866-5797. Page 13...
-
Página 14: Troubleshooting
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-888-866-5797. Item 68144... -
Página 15: Parts List And Diagram
Hand Saver Strap Spline Spring Hook Joint Gear Wire Rope Screw M6 X 10 Handheld Switch Clip Mini Rocker Switch Gearbox Base Circuit Breaker Seals Socket Leads Planetary Gear 1 Mounting Plate Item 68144 For technical questions, please call 1-888-866-5797. Page 15... - Página 16 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.