Assembly - Attaching The Fan Blades; Attaching The Blades To The Blade Brackets; Fastening The Blades Assemblies To The Motor - HAMPTON BAY 91100 Guía De Uso Y Cuidado

Assembly - Attaching the Fan Blades

1
Attaching the blades to the blade
brackets
WARNING: Remove the rubber motor stops on the bottom of the
fan before installing the blades or testing the motor.
NOTE: Your fan features revolutionary advancements for quick and
easy blade installation. This includes an alignment post and captive
blade bracket screws.
NOTE: Your fan blades are reversible. Select the blade side finish
which best accentuates your decor.
□
Attach a blade (F) to a blade bracket (G) by inserting screws
(DD) into the holes in the blade and through the blade
bracket.
□
Tighten each screw securely.
□
Repeat these steps for each blade (F) and blade bracket (G).
DD
F
G
2
Fastening the blades assemblies
to the motor
□
Insert the blade / blade bracket assembly through the hole
in the side of the center flywheel on the fan-motor assembly
(E), align the two screws holes in the blade bracket with
the screw holes in the center flywheel and insert the blade
bracket screws (EE). Tighten securely.
□
Repeat this step for the remaining blade assemblies.
13
Please contact 1-855-HD-HAMPTON for further assistance.
E
EE
HAMPTONBAY.COM