Black and Decker Price Pfister Avalon 26 Serie Guia De Inicio Rapido página 3

7
7 CONTROL BODY INSTALLATION
Apply plumber's putty into groove on bottom of Gasket (7A) per manufacturer's
recommendations. Place Gasket (7A) under base of Control Body (7B). From
above sink, insert Threaded Shank (7C) and Flexible Tubing (7D) through side
hole of sink.
8
8C
8A
8 SECURING CONTROL BODY
From underneath sink, place Washer (8A), and Locknut (8B) onto Mounting
Shank (8C). Make sure Handle (8D) is facing forward and it swings equally in
both directions. Tighten Locknut (8B) fi rmly to Shank (8C).
Caution: Do not over tighten!
ENGLISH
7B
7C
7D
7A
8D
8B
9
9A
9B
9 HOSE GUIDE & SOAP DISPENSER GUIDE INSTALLATION
Insert Hose Guide Shank (9A) through Flange Gasket (9B) and insert Soap
Dispenser Guide Shank (9C) through Foam Gasket (9D) and into the sink holes.
(Both Hose Guide and Soap Dispenser Guide can be placed in either hole).
10
10A
10C
10 SECURING HOSE GUIDE & SOAP DISPENSER GUIDE
From underneath sink, secure Hose Guide (10A) and Soap Dispenser Guide
(10B) by screwing Plastic Locknuts (10C) and (10D). Thread on Bottle (10E)
to Soap Dispenser Shank (10F). Hand tighten.
Caution: do not over tighten!
3
9C
9D
10B
10F
10D
10E