Remote Control - KlipXtreme Cinematik KWS-760 Manual De Instrucciones

Back panel
1
2
6
7
CEN
FL SL
Connectors
1. Antenna Picks up the signal for the tuner
Provides the connection of sources equipped with digital audio
2. Optical audio port
ports
These RCA jacks allow the connection of audio devices fitted with
3. AUX input
RCA and 3.5mm inputs when using the adapter
Provide the connection of additional audio sources with true 5.1
4. DVD inputs
surround sound capability
5. Speaker output Connect the front, rear and center satellites in this terminal block
connectors
6. Main power switch Turns the speaker on and off
7. AC power cord Insert the power cord plug in an AC outlet
3
4
5
SR FR
Description

Remote control

1
3
4
6
8
12
Buttons
Press this button to alternate between the standby and active
1. Standby button
modes on the device
Cancels the audio coming from the speaker. Press it again to
2. Mute button
unmute the speaker
Press any key from 0 to 9 on the remote to choose directly the
3. Numbered keypad tracks or channels you want to play. It works in USB and
modes only
Press this button to toggle among the available audio
4. Source button
sources
This button switches the decoder between 2.1 and 5.1 audio
5. Pro Logic
channels
Selects the front, rear or center speaker to adjust its output
6. Select button
level individually using the volume keys
7. Memory button
Press it to store your favorite channels for quick recall
Increases or lowers the volume level coming from the speaker
8. Vol +/Vol–
system
Press to start and pause media during Bluetooth
9.
audio playback
Takes you back to the previous track on your play list. Available
10.
in Bluetooth
®
Takes you to the next track on your play list. Available in
11.
Bluetooth , SD™
®
12. Tuning – button
Press it to scan in a downward direction
13. Tuning + button Press it to scan in a upward direction
2
1 2 3
4 5 6
7 8 9
5
0
SOURCE PRO-LOGIC
7
SELECT MEMORY
VOL+
10
11
9
VOL-
TUNING – TUNING+
13
Description
, SD™ or USB
®
, SD™ and USB modes
and USB modes
SD™