Cleaning Your Cocoa~Latte - Back to Basics COCOA-LATTE Manual De Instrucciones

The Back To Basics
use. Note: Do not wash any parts in the dishwasher and do not immerse the motor
base or the mixing container in water or other liquid.
1. Unplug the appliance from the electrical outlet. Allow the entire appliance to
cool before cleaning.
2. Remove the mixing container from the motor base.
3. Pour out any unused portion of the hot drink mixture.
4. Without submerging the mixing container, wash the interior by pouring a
combination of mild detergent and water into the mixing container. Rinse and
dry thoroughly.
5. Open the dispensing valve and allow clean water to flush through and clean the
valve. After each use, unscrew and disassemble the valve for cleaning. See
"Cleaning the Dispensing Valve" instructions below.
6. Wash the lid with mild detergent and water.
7. Wipe the exterior of the motor base and mixing container with a soft, damp
cloth.
Lever
Cap
Spring
Stopper Pin
Stopper
Valve Body
To disassemble the valve for cleaning:
1. Remove the valve from the container by unscrewing the entire valve body
counter-clockwise.
2. Remove the cap by unscrewing it counter-clockwise.
C Y
LEANING OUR
® ™
Cocoa~Latte
Cleaning the Dispensing Valve
C ~L
OCOA
Hot Drink Maker should be cleaned after every
5
™
ATTE