Steren COM-840 Guía Rápida página 39

If you are not connected, your service provider probably requires you clone
the MAC address of your computer to the router. To do so, click on 'Internet
Setup' in the menu, then click on 'Clone MAC Address' button to get your
computer's MAC address and then click the 'Save' button below.
If you are still not connected, or experience an erratic connection, your
modem may have the same IP as the router (192.168.1.1). You will need
to change the router's IP. Click on 'LAN Setup'- 'LAN IP Address' and you
will see this IP in the main interface. You may edit it to something different
(192.168.2.1 for example). After entering the new IP, click on 'Save' below,
the router will reboot, and you will need to enter the user name and password
again. Check your system status for IP again, and test connection.
Note: You will need to enter the new IP in the browser to access the user
interface for any future setting changes.
15