Before First Use - Hamilton Beach DrinkMaster Manual Del Usuario

Using Your DrinkMaster
BEFORE FIRST USE: Wash container and mixing shaft
before using.
1. Place mixing shaft in unit by tilting
the head back and inserting the
mixing shaft until it "snaps" into
place.
2. Set Control Switch to
Plug into electrical outlet.
3. Place ingredients to be mixed in
container.
4. Place container onto DrinkMaster,
making certain that container's
top edge is behind container
support and container bottom is
on container rest.
5. With mixing shaft "snapped" in place, move Control
Switch to desired speed to process. Start with Speed 1
(LOW) then increase to Speed 2 (HIGH) if desired.
6. For hard ice cream or very thick shakes, remove the
container from the rest and support. With mixing shaft still
submerged in mixture, move the container around for more
thorough mixing.
7. When finished, turn unit to
8. Pour contents from container and serve.
®
(off).
(off) and tilt head up.
5