Pairing to another Sharktooth
Start pairing on
Unit is off: Vol- for 5 sec
®
Red and Blue LED blink
both Sharktooth
Prime Unit
alternate
Voice: "PAIRING" when
start, "PAIRING successful"
when finish
How to use the intercom
Open/Close
Vol- short press
intercom
Pairing to another Intercom
It is possible to pair the
Sharktooth
brand intercom, only if
the Universal Intercom feature. The
will use the phone pairing to connect to the
Prime
Universal Intercom of the other unit.
Start pairing on
Unit is power off
®
Sharktooth
Prime
Vol+ for 5 sec
Unit as a phone
Red and Blue LED blink
alternate
Start pairing on
Follow the manual for
other Intercom
UNIVERSAL INTERCOM
PAIRING on the other unit
Prime Unit
®
®
to another
Prime
the other unit supports
®
Sharktooth
How to use the Universal Intercom
Open/Close
Vol - double click / Vol +
short press
Universal Intercom
ATTENTION: you need to repeat two times
the Open command: after you hear the voice
"Connected", make again Vol - double click
Special Action
Unit is power off: Vol+ and
Reset all pairing
Vol- for 7 sec (full blue LED
for 3 sec)
Enable auto answer Vol- for 7 sec
Voice prompt: "Enable"
Vol- for 7 sec
Disable auto
answer
Voice prompt: "Disable"
7