Ninja 1200MS Manual Del Usuario página 5

FIG. 5: Vacuum cutoff valve cleaning
Slide filter off and lift out to remove.
Lubricate the solution line quick-connect coupling
(Fig. 1D) with a small amount of rust-inhibiting oil such
as LPS-3 or WD-40.
To maintain appearance, wipe interior and exterior
surfaces with a damp cloth. For deep cleaning and a
lasting, protective shine, use an automotive vinyl
cleaner/protectant product.
MAINTENANCE
IMPORTANT! Pump crankcase oil must be changed
after an initial 50-hour break-in period. Thereafter, oil
must be changed every 3 months or at 500 hour
intervals thereafter. Replace only with General Pump Oil
SAE 30W. Order part no. 13-030/24-00490.
To change the oil, see "Changing the 1200MS Pressure
Pump Oil" below.
07-02233B MANUAL - 1200MS 115V PORTABLE
Slide filter tube back into place. Rotate assembly
to a 45° angle toward outside wall of tank.
reinstall.
FIG. 6: Recovery tank strainer
Slide filter upward to remove. Rinse
filter clean with water and reinstall.
5 Ninja