GE AHE18 Manual Del Propietario Y Instrucciones De Instalación página 11

Installation Instructions
3. PREPARE THE AIR CONDITIONER
(continues)
Remove the shipping screws located on the
E.
top of the case.
Remove the ground screws from each side
F.
You will need them later in the installation.
Slide the air conditioner from the case by
G.
gripping the base pan handle, lifting up on
the air conditioner, and pulling forward. Have
a second person brace the case. Do not pull
or lift on the styrofoam discharge area.
Your unit may come with internal packaging.
H.
This packaging must be removed prior to
installing the air conditioner back into the
cabinet.
49-7795
4. PREPARE THE CASE
Attach the top rail gasket to the bottom of
A.
the top rail.
Install the top mounting rail with 4 type A
B.
screws from the inside of the case. Press
firmly to drive the screws into the gasket and
through the top mounting rail.
Slide each side retainer onto the edge of
C.
each according panel. The figure shows the
orientation of each accordion panel and side
retainer assembly relative to the case from a
top view of the unit.
Do not
pull or
lift in this
area—
damage
to the
unit may
result
FRONT
Slide the left and right accordion panels
D.
into the top and bottom mounting rails.
Top left
Top mounting rail
SIDE RETAINER
WINDOW FILLER PANEL
SIDE RETAINER
WINDOW FILLER PANEL
Top right
11