Controls; Remote Control - GE AHE18 Manual Del Propietario Y Instrucciones De Instalación

Controls

Features and appearance will vary.
Light indicates the unit is in the
temperature or delay time Set mode.
NOTE: The display always shows the room temperature
setting the Set temperature or the Delay timer.
Air Conditioner Controls
Controls
ower Pad
1. P
Turns air conditioner on and off. When turned on, the
display will show the room temperature.
isplay
2. D
Shows the room temperature or time remaining on the
Delay timer. Shows the Set temperature while setting
the temperature in Heat, Cool or Energy Saver
modes.
emp Increase
3. T +
Saver mode. The Set light will turn on while setting.
Delay Increase
4.
remote control will set the delay time when using the
Delay 1–24hr timer. The Set light will turn on while
setting.
an Speed Pads
5. F
or Auto on the unit. NOTE: On the remote control, use
fan speeds to Low, Med or High
turn Auto fan on.
ode Pad
6. M
Saver or Fan Only mode.
NOTE: The default temperature reading on the display is degree Fahrenheit (°F). To change the
display to degree Celcius (°C), press the Temp Increase
and hold for 3 seconds. Repeat the process to change back to degree Fahrenheit (°F)
4
Heat
/Decrease – Pads
Heat, Cool or Energy
/Decrease – Pads
+
Low, Med, High
Heat, Cool, Energy
Light indicates the
delay timer is set.
Delay
Delay timer
Decrease
Mode select
Fan speed
Decrease
Temperature
set Increase
and decrease
elay Pad
7. D
Delay ON—When the air conditioner is off, it can be
set to automatically come on in 1 to 24 hours at its
previous mode and fan settings.
Delay OFF—When the air conditioner is on,
it can be set to automatically turn off in 1 to
24 hours.
How to set:
Press the Delay 1–24hr pad on the unit or the Delay
pad on the remote control. Each touch of the Increase
timer in 1-hour intervals. The Set light will turn on while
setting.
To review the remaining time on the Delay 1–24hr
timer, press the Delay 1–24hr pad on the unit or the
time if desired.
To cancel the timer, press the Delay 1–24hr pad until
Auto pad to
the light on the Delay 1–24hr pad goes off.
and Temp Decrease
Fan Fan

Remote Control

buttons together
Delay timer
Increase
Auto Fan on
Fan speed
Increase
49-7795