Battery replacement
6
Maintenance, repair and trouble shooting may only be performed by a trained call system specialist. Aside from normal battery replacement, CareMat
is maintenance-free.
EU Declaration of Conformity
9
See attachment
WEEE
10
Devices with this symbol must be treated separately during disposal. This must be done in accordance with the laws of the respective countries
for environmentally sound disposal, processing and recycling of electrical and electronic equipment.
Contact
11
BBC Bircher Smart Access, BBC Bircher AG, Wiesengasse 20, CH-8222 Beringen, www.bircher.com
Designed in Switzerland / Made in Switzerland
4
1. Underside of the mat
Remove the four housing screws (Philips #1)
Caution: do not to lose the four O-ring seals.
2. Upper side of the mat
Carefully raise the housing cover
Caution: Do not pull the wires out
of the clamp terminals.
3. Replace the two CR2 batteries.
Caution: Observe correct polarity.
4. Place the housing cover back into position.
Caution: Take care to ensure that no foreign
particles or moisture find their way into the
housing or onto the sealing edge surrounding
the housing and that no cables are trapped.
5. Underside of the mat
Restore the four screws together with the O-ring
seals to their previous positions and carefully
tighten them by hand.